1/2 Mm System Elliptisk Nål Inkl. Hodeskell

1/2 Mm System Elliptisk Nål Inkl. Hodeskell

VM520EB/HDUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS WITH HS10 HEADSHELLElliptical Bonded profile diamond stylusVM type dual magnet systemPara-toroidal coils improve generating efficiencyAluminium tapered cantileverCentre shield plate between stereo channelsPre-assembled with a lightweight aluminium headshell (AT-HS10) for a quicker, easier set-upStandard elliptical stylus model with an elliptical bonded stylus that reduces tracing distortion and allows for higher sound reproduction accuracy. Pre-assembled with a lightweight aluminium AT-HS10 headshell, the user can enjoy a hassle-free set-up.AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.Para-toroidal generating systemPara-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.Centre shield plate reduces crosstalkA permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself. PREASSEMBLED WITH HS10 HEADSHELLVM520EB cartridge is fitted onto a die cast aluminium HS10 Headshell suitable for 4-pin turntable arms.ELLIPTICAL BONDED STYLUSElliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.TypeVM TypeMounting1/2” centresFrequency Response20 - 23,000HzChannel Separation27dB (1kHz)Output Channel Balance1.5dB (1kHz)Output Voltage4.0mV (1kHz, 5cm/sec.)Vertical Tracking Angle23˚Vertical Tracking Force Range1.8 – 2.2g (2.0g standard)Stylus ShapeElliptical BondedStylus Size0.3 x 0.7 milStylus ConstructionBonded Round ShankCantileverAluminium PipeCoil Impedance2,700Ω (1kHz)Static Compliance35 x 10-6 cm/dyneDynamic Compliance8 x 10-6 cm/dyne (100Hz)Recommended Load Impedance47,000ΩRecommended Load Capacitance100 – 200pFWeight6.4gDimensions17.3 (H) x 17.0 (W) x 28.2 (L) mmReplacement StylusVMN20EBAccessories IncludedCartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1