Audio-Technica AT-ART9XA

An update to the AT-ART7, the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a boron cantilever and an Audio-Technica Reference Transducer (ART), a component used only in our premium cartridges. Compared with the magnetic core used in most MC cartridges, non-magnetic core cartridges feature no magnetic distortion, allowing for natural timbre and a precise sound field. Although conventional non-magnetic cores struggle with output voltage, the AT-ART9XA features a newly designed coil armature with an improved output voltage of 0.2 mV (1 kHz, 5cm/sec). Threaded cartridge mounting holes make installation to a headshell or integrated tonearm incredibly easy. • High-separation, wide-response dual moving coil The dual moving coils of the system are aligned in an inverted V shape, which provides high separation and wide response for clear sound localization and minimal distortion • Shibata stylus and 0.28 mm diameter solid boron cantilever The Shibata stylus ensures accurate high and mid-low range reproduction, and the boron cantilever provides excellent response characteristics. • Neodymium magnet and permendur yoke for significantly increased magnetic energy The specially designed magnetic circuit optimizes energy in the magnetic gap where the generator coils are located. • Newly designed coil armature for improved output voltage A complete redesign of the armature offers a 20% increase in the cross-sectional area of the generator coil to provide an output voltage of 0.2 mV. • PCOCC coils for high-fidelity transmission Using PCOCC (Pure Copper Ohno Continuous Cast) wire for the coils achieves pure signal transfer. • Machined aluminum base for stable playback The machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability. • Hybrid body reduces undesirable parasitic resonance The machined aluminum housing combined with high-rigidity plastic helps reduce undesirable parasitic resonance for improved sound quality. • Threaded cartridge mounting holes for easy installation on headshells or integrated tonearms The cartridge body includes threaded screw holes that allow installation on headshells or integrated tonearms with only two screws (no nuts necessary). Cartridge & Stylus Frequency Response 20-50,000 Hz Channel Separation 30 (dB at 1 kHz) Vertical Tracking Angle 20° Vertical Tracking Force 1.6-2.0 g (1.8 g standard) Stylus Construction Nude Recommended Load Impedance Min. 100 ohms (when head amplifier connected) Coil Impedance 12 ohms (1 kHz) DC Resistance 12 ohms Coil Inductance 2.5 µH (1 kHz) Output Voltage 0.2 mV (1 kHz, 5 cm/sec.) Output Channel Balance 0.5 dB (1 kHz) Stylus Shape Shibata Cantilever 0.28 mm diameter solid boron Static Compliance 20 x 10-6 cm/dyne Dynamic Compliance 10 x 10-6 cm/dyne (100 Hz) Mounting Half-inch Cartridge Weight 8.5 g (0.30 oz) Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush Threaded Hole M2.6 x 2 Notes Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable. Vil du lese mer om Audio-Technicas pickup'er?Klikk her for å se hele deres nyeste katalog med grundig info om hver modell, og mye annet interessant: Audio-Technica Cartridges Catalogue