Audio-Technica AT-LP140XP-BK Svart

Audio-Technica At-Lp140xpbk, Direktedrevet Dj-Platespiller, 33 1/3,45,78 Rpm, -8 - 16%, 0,2%, 50 Db, Manuell

Audio-Technica AT-LP140XP profesjonell DJ platespiller Direktedrevet platespiller med høyt dreiemoment og solid plateplate av dempet støpt aluminium som sikrer en stabil rotasjon. Funksjoner hydraulisk S-arm med høydejustering, justerbar motvekt og anti-skalejustering. Audio-Technica har vært ledende innen utvikling og design av pickuper i mer enn 50 år, og du kan oppleve den ekspertisen med den medfølgende høyytelses og holdbare AT-XP3 DJ pickupen 0,6 mm konisk nål. Kobles til forsterkeren med den medfølgende avtakbare phonokabel (RCA). 331/3, 45 og 78 o/min. Finnes også i sølv. 

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell. Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output. Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a popup stylus target light; and a removable hinged dust cover. Experience high-fidelity audio and professional DJ performance Direct-drive, high-torque servo motor with speed stabilization Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Professional anti-resonance, mass-damped, die-cast aluminum platter with felt mat AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest Dedicated phono-level output (5.5 mV) Stroboscopic platter with speed indicator Forward/reverse operation and variable pitch control with quartz speed lock Popup stylus target light for easier cueing in low light Damped base construction for reduced low-frequency feedback coloration Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover Type 3-speed, fully manual operation Motor High-torque DC motor Drive Method Direct drive Speeds 33-1/3 RPM, 45 RPM, 78 RPM Turntable Platter Die-cast aluminum Starting Torque >2.2 kgf.cm Wow and Flutter <0.2% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio >50 dB Output Level 5.5 mV nominal at 1 kHz, 5 cm/sec Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 4.3 W Dimensions 452.0 mm (17.80") W x 352.0 mm (13.86") D x 158.6 mm (6.24") H Weight 10.0 kg (22 lbs.), without dust cover Accessories Included AT-XP3 phono cartridge; AT-HS6 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter Tonearm type:Balanced S-shaped tonearm with detachable headshellEffective arm length:230.5 mmOverhan16 mmTracking error angle:Less than 3 degreesApplicable cartridge weight:3.5-8.5 gAnti-skating range:0-4 gReplacement Stylus:ATN-XP3