Audio-Technica AT-MONO3 SP

Audio Technicas AT-MONO 3/SP pickup er i sin helhet designet spesielt for å kunne spille shellac-plater (78rpm). Dette er en moving coil-konstruksjon, men med høyt utgangssignal på 1,2 mV, som gjør at den kan brukes uten RIAA-forforsterker som er spesielt tilpasset Moving Coil. Dette er en pickup som gir optimal lyd og klarhet fra 78rpm mono-plater. AT-MONO3/SP HIGH OUTPUT MOVING COIL CARTRIDGE Specially designed for “shellac” or phonograph records High output moving coil cartridge Excellent production quality and wound with PCOCC coil for signal purity Delivers excellent fidelity and superb clarity Can be used without additional pre-amplification or a MC transformer The Audio Technica AT-MONO3/SP cartridge is special – redesigning not just the needle, but the whole cartridge specially for “shellac” or phonograph records. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2 mV, it can be used without additional pre-amplification or a MC transformer.Proven in use for many years in Japan, the Audio-Technica AT-MONO3/SP cartridge in now available in Europe and helps to bring back the pure joy of discovery and listening pleasure for 78 RPM record playing. Made specifically for mono recordings, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/SP also has an adapted vertical compliance. Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability. The average usage time is 500 hours extending the life span of precious mono recordings. High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity. To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body. “A TRUE MONO CARTRIDGE” The AT-MONO3/SP cartridge only generates electrical signal with horizontal movement due to the horizontal configuration of the coil. “500 HOURS OF USE” The average usage time is 500 hours extending the life span of precious mono recordings. Type Horizontal Mono Moving Coil Mounting 1/2" Centers Frequency Response 22 - 22,000 Hz Body Material Aluminium/Synthetic Resin Output Voltage 1.2 mV (at 1 kHz, 12 cm/sec) Vertical Tracking Angle 23° Vertical Tracking Force Range 3.0 - 7.0 g (5.0 g standard) Stylus Shape Conical Stylus Size 2.5 mil Stylus Construction Nude Square Shank Cantilever Aluminum Pipe Coil Impedance 40 ohms (1 kHz) Coil Inductance 190 µm (1kHz) DC Resistance 40 ohms Static Compliance 10×10-6cm/dyne Dynamic Compliance 3.5×10-6cm/dyne (100Hz) Recommended Load Impedance 400 - 47,000 ohms Weight 6.8g Dimensions 16.0 (H) x 16.6 (W) x 26.5 (L) mm Replacement Stylus When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price. Accessories Included Screwdriver, 4 screws, 2 washers and 2 nuts, spacer/weight, stylus brush Vil du lese mer om Audio-Technicas pickup'er?Klikk her for å se hele deres nyeste katalog med grundig info om hver modell, og mye annet interessant: Audio-Technica Cartridges Catalogue