Format Cirkulärborste Hö/vä 125x13x22,23mm 0,50mm, Tvinnad, Stål

Betalingsalternativer

Frakt og levering

Beskrivelse

Wheel brush, steel wire, knotted on right/left.Design: Aggressive design with knotted wire. For extreme use with high peripheral speeds. Can also be used with hand machines. Bore 22.23 mm.Application: For descaling, deburring and removal of rust and adhesive residues, as well as for preparing and cleaning weld seams.Note: Observe safety recommendations. Hardened steel wire, knotted on left/right for even wear.

Produktinformasjon

Wheel brush, steel wire, knotted on right/left.Design: Aggressive design with knotted wire. For extreme use with high peripheral speeds. Can also be used with hand machines. Bore 22.23 mm.Application: For descaling, deburring and removal of rust and adhesive residues, as well as for preparing and cleaning weld seams.Note: Observe safety recommendations. Hardened steel wire, knotted on left/right for even wear.

Topplisten: Format Elektroverktøy tilbehør

Se mer

Format Spiralborr Din 338 Rn Hss 8,20mm Profilslipat

Jobber drill with cyl. shank, HSS, DIN 338, bright surface, Format.Design: Bright surface, steam-tempered from 2.4 mm with precision ground point as well as high concentricity and pitch accuracy.Application: Particularly suitable for steel and steel casting (alloyed and non-alloyed) grey cast iron, malleable cast iron, nodula...

65,-

Format Stegborr Tin 4-31,0mm

Precision taper sheet and tube drill.Design: According to factory standard, CBN deep sharpened, straight fluted. Chuck slippage is avoided by the 3-surface shank. With cross point and laser print of hole Ø and speed. The hole Ø can still be read with the tool rotating.Application: For burr-free drilling and reaming of sheets,...

999,-

Format Konisk Försänkare Din 335c Hss 90gr 4,3mm

90° countersinks and deburring countersinks.Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DI...

119,-

Format Konisk Försänkare Din 335d Hss 90gr 37,0mm Mk

90° countersinks and deburring countersinks with morse taper shank.Design: HSS, DIN 335-D, 90° countersink angle. Axial and radial relief ground and CBN deep-ground. With straight flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for...

1 099,-

Format Svängjärn Din 1814 Stl. 0, Tapp 2,0-5,0mm

85,-

Format Verktygshållare 2,0-5,0mm, 85mm, Kromad

179,-

Format Planförsänkare Din 373 Hss Tin M10 Kh

180° counterbore with cyl. shank, for core hole.Design: Spiral fluted with fixed pilot.Application: For countersinking inner hexagon screws DIN 912, DIN 6912 and DIN 7984 as well as cylinder screws DIN 84 (ISO 1207). Ideal for burr-free and chatter-free sinking of steel, cast iron and light metals.Note: The pilot of the count...

529,-

Format Konisk Försänkare Hsse Extra Lång 25,0mm 90gr

90° countersinks and deburring countersinks.Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DI...

2 099,-

Format Konisk Försänkarsats Hss Extra Lång 6,3-20,5mm 90gr

6 399,-

Format Planförsänkare Hss M14 Kh Mk

Counterbore with Morse taper shank for core hole.Design: Spiral fluted with fixed pilot.Application: For countersinking inner hexagon screws DIN 912, DIN 6912 and DIN 7984 as well as cylinder screws DIN 84 (ISO 1207).Note: Further dimensions available on request.

1 099,-