Sachtler System Ace XL FT MS

The Sachtler System Ace XL FT MS with FT 75 Legs includes the ACE XL fluid head, the Flowtech 75 carbon fiber tripod, and a mid-level spreader. This tripod kit supports payloads ranging from 4.4 to 17.6 pounds, and is suited for DSLRs, mirrorless, and small- to medium-sized camcorders. Use the lightweight, carbon fiber Flowtech tripod on its own for greater flexibility on uneven surfaces, or with the mid-level spreader for greater stability. Sachtler Ace XL Fluid Head (75mm Bowl) The Sachtler Ace XL Fluid Head (75mm Bowl) is designed for digital cine-style cameras, supporting rigs weighing up to 17.6 pounds. This fluid head is suitable for larger DSLR and mirrorless MFT cameras, as well as pro-style cameras such as the Blackmagic URSA Mini/Pro, Canon C200/C300 Mk II, Sony FS series, and the Panasonic EVA1. The Ace XL fluid head features eight steps of counterbalance and three steps of pan and tilt drag adjustment, plus a zero drag option for pan and tilt. Mount your camera using the Ace XL Fluid Head's slide-in balancing plate with 1/4-20" screw and locating pin. With a sliding range of 4.1" this head can adapt to variously configured rigs. Additional features include a detachable, right-side pan bar and an illuminated bubble level. With an integrated flat head base, the Ace XL can be configured for shooting with a slider. Compatible Cameras Including but Not Limited To: Blackmagic URSA Mini/Mini Pro Canon C200/C300 Mk II Sony FS series Panasonic EVA1 Ace XL Fluid Head Features Fluid head with 17-pound capacity suited for larger DSLR and mirrorless MFT cameras, and for pro-style digital cine cameras Eight steps of counterbalance; three steps of pan and drag plus zero settings for disengaging the pan and tilt tension 75mm ball-based head has an integrated flat bottom useful for mounting to sliders, etc. Additional features include a four-inch sliding plate range, 1/4"-20 camera screw, right-side pan bar and illuminated bubble level Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24" to a maximum height of 61" when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections. Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while...