Schatten Design BJ-02 Player Banjo Pickup

Schatten Design CH-1 Celtic Harp Pickup, Pickup, Special pickup for smaller Celtic harps up to a maximum of 28 strings, The pickup is attached to the top and can be easily removed and stuck on again, The socket holder can be clamped to the back of the harp, The cable is stowed in the socket holder, The CH-1 is a passive picku...

Schatten Design LP-15 Outsider Pickup, Universal Pickup, The LP-15 are extremely thin and lightweight top pickups with a thickness of only 1.25 mm, The sensor weighs less than 2 grams and does not hinder the vibrations of the top, 6.3 mm jack plug

Schatten Design D-4 Std Dulcimer Pickup, Pickups for Appalachian Dulcimer, Suitable for Appalachian Dulcimer (all sizes), To be mounted to the soundboard of the dulcimer with a special residue-free adhesive, The jack is mounted to the End Block with 3M VHB tape

Schatten Design Dualie Inside`R Pickup, Universal Pickup, Can be used directly without preamplifier, Suitable for all string instruments with vibrating top, Twin pickup for mounting inside the instrument, Jack panel socket, 3 m instrument cable included

Schatten Design Inside Putty, Adhesive paste, For mounting Schatten Design pickups, 2 portions

Schatten Design MicroPre Preamp One Channel, PCB Preamp, Single channel JFET board preamplifier, Input impedance: up to 10 MOhm, Output impedance: less than 3.5 KOhm, Operating time with 9V alkaline battery: 1500 hours (not included!), Operating time with 2 CR2032 button batteries totalling 6V: 750 hours (not included!), Dime...

Schatten Design BJ-02 Player Banjo Pickup, Passive Banjo Pickup, Incl. simple socket holder for attachment to the clamping hook

Schatten Design M-06 Pro Mandolin Pickup, Pickup for Mandolins, Suitable for mandolins with adjustable bridge and flat back, Suitable for frame heights of 41.3 to 62 mm, Including SJA plus jack socket with volume control

Schatten Design HD-4 Hammered Dulcimer Pickup, Dulcimer Pickup, Consisting of 2 pickups connected to an output socket, The pickups are attached to the body under the strings with the included double-sided adhesive tape, The box with the output socket is attached to the front with 3M VHB adhesive tape, Internal mono - stereo s...