Castle Creations 010015002 Sidewinder Micro 2 1/18 Combo with 08

Castle Sidewinder Micro 2 Sport 1/18 Scale ESC + 0808-5300KV Motor ComboAwesome, Affordable Micro Performance!Sidewinder Micro 2 is our entry level 1/18 scale controller capable of 2S - 3S LiPo, with a 2 amp peak BEC, and is perfect for 1/18 scale 2WD vehicles and smaller 4WD (up to 900g) such as the Team Associated RC18B2 or Dromida SC4. Whether you are converting to a brushless setup or simply want more power than your current brushless power system is putting out, Sidewinder Micro 2 is the perfect controller to fit your needs.Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo)Sidewinder Micro 2 features:Adjustable BEC functionality: 5.5V or 7.5V (default 5.5V)The ability to diagnose and resolve problems in the field are made easy as this ESC will communicate with audible tones when certain conditions are present. Alerts are present for start fail, voltage cutoff, radio glitch, over-temperature, over-current and excessive load detections.Updated circuitry and refined software makes for ultra-smooth starts.Link Live to communicate power system information to an external device. This feature, when enabled, will allow users to experience real-time telemetry data such as battery voltage, ESC temperature, motor power output and battery ripple. Compatibility with the Futaba S.BUS® T4PX transmitter (requires purchase of Castle Telemetry Link for S.BUS2).Manual programming settings include Brake/Reverse Type, Voltage Cutoff, Brake Amount, Drag Brake and Motor Type. Waterproof: NoTelemetry Capable: YesData Loggin NoAuxiliary Wire: NoMinimum Input Voltage: 2SMaximum Input Voltage: 3SSensored Capable: NoRecon G6 Certified ESC: NoROAR Certified ESC: NoCRYO-DRIVE: NoESC Specs:Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo / 4-9 cell NiMHBEC Specifications: 2A Peak BEC, Adjustable: 5.5V or 7.5V, default 5.5VOperating Environment: N/ABrake: ProportionalReversible: Yes, but can be disabled for racingOn/Off Switch: YesCooling Fan: NoLength: 38mmWidth: 22mmHeight: 12.7mmWeight (w/wires): 26gConnectors: 3.5mm bullet connectors on the motor wiresItems Needed for Operation: Battery connectorsProduct Use Statements: Not intended for use in wet conditions, the ESC is not waterproofApplication Guidelines: 1/18th scale RC hobby vehicles weighing up to 0.9kgProgrammability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.Telemetry Link Capable: YesTech Notes: The Sidewinder Micro 2 has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.Motor Specs:Input Voltage Range: 2-3S LiPo, 4-9 cell NiMHKv: 5300Max. RPM: N/ALength: 38.1mmDiameter: 20mmShaft Diameter: 2mmShaft Length: 12mmWeight: 50gMounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8”Cooling Fan: NoConnectors: 3.5mm male bulletsItems Needed for Operation: N/AProduct Use Statements: N/AApplication Guidelines: Intended for 2WD and lighter 4WD vehicles (