Castle Creations Mamba X SCT WP ESC/1415-2400kV Motor

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC, with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.**Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs** **using 3 or 4S LiPo power.   FEATURESESC; 2S - 6S input voltage range Smartsense uses motor"s sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorless mode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more Audible alerts CNC aluminum case 12AWG high strand count silicone insulated battery wires  Motor; High-strength 180°C grade neodymium sintered magnets with high-strength wrap High-temperature, high purity copper windings High-performance 0.2mm steel lamination stacked stator Vibration dampening wave spring on shaft Rotor position sensor eliminates cogging and inconsistency during startup CNC machined 6061 T-6 aluminum endbells and motor can 13AWG high strand count silicone insulated wires with 4mm male bullet connectors Four pole configuration for maximum efficiency at high RPM ROAR standard sensor port and labeled connections Replaceable front end bell/bearing assembly and rotor/shaft assembly  INCLUDESMamba X Extreme 1/10 scale Electronic Speed Control Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof Switch Replaceable Motor Sensor Harness 12AWG Battery Wires Cooling Fan 4mm Gold Plated male and Female Bullet Motor Connectors 1415 1Y 2400Kv 4-Pole Sensored Brushless Motor w/1/8" 3.17mm Shaft Sensor Wire Three 3x5mm Socket Head Cap Screws  SPECIFICATIONSESC, CSEM9500 Input Voltage Range: 2S - 6S LiPo BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Programmable: Fully programmable with Castle Link USB Adapter, and downloadable Castle Link Windows software Telemetry Link Capable: Yes Brake: Proportional Reverse: Yes, may be disabled for racing Cooling Fan: 1.2" (30mm) removable Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm) Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to run Motor; CSEC6000 Input Voltage Range: 3-4S LiPo Kv: 2400 Max RPM: 75,000 Length: 2.7" (69.5mm) Diameter: 1.4" (36mm) Shaft Diameter: 1/8" (3.17mm) Shaft Length: 0.61" (15.5mm) Weight: 11.2oz (318g) Mounting Hole Size: M3 @ 25mm  COMMENTSWaterproof under normal operation. Not intended for operation when completely submerged in water.