Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm
90° countersinks and deburring countersinks, HSS-E PM.Design: Axial and radial relief ground and CBN deep-ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials.Application: Specially designed for the highest demands in INOX stee......
fra 259,-
Tilgjengelig i 1 butikker
Betalingsalternativer
Frakt og levering
Beskrivelse
90° countersinks and deburring countersinks, HSS-E PM.Design: Axial and radial relief ground and CBN deep-ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials.Application: Specially designed for the highest demands in INOX steel, stainless steel and Hardox 400. For universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped relief grinding on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed.Note: Sufficient supply of coolant is essential. HSS-E PM has, in comparison to conventional HSS steels, a consistent, fine grained material structure. This means they have good hot hardness, pressure resistance and resistance to wear.
Produktinformasjon
Oppdag Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm
Er du på jakt etter den perfekte verktøyet for presisjonsarbeid? Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm har alt du trenger for å ta hånd om de mest krevende oppgavene. Denne koniske forsänkeren er designet med fokus på kvalitet og effektivitet, perfekt for både profesjonelle og hobbyfolk.
Spesifikasjoner og Design
- Vinkel: 90° for nøyaktig forsenkning
- Materiale: HSS-E PM for høy slitestyrke
- Flute-design: Rett, U-formet lengde for optimal spånavgang
- Bruksområder: Spesialdesignet for INOX-stål, rustfritt stål og Hardox 400
Med en konisk form og presisjonsbearbeidede skjær kan denne forsänkeren enkelt håndtere bore- og forsenkingsoppgaver for senkeskruer i henhold til standardene DIN 963, 964, 965, 966 og 7991. Tenk deg hvordan det ville vært å aldri mer måtte bekymre deg for grader eller burr; med Format Konisk Försänkare får du en enkel og effektiv løsning!
Optimal ytelse og holdbarhet
Det som virkelig skiller Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm fra mengden er den utmerkede skjæreevnen. Den konisk formede avlastningen og rakevinkelen gir utmerket ytelse selv ved de sterkeste påkjenningene. Husk at tilstrekkelig kjøling er avgjørende for å oppnå best mulig resultat og øke levetiden på verktøyet!
Enten du er en erfaren fagperson eller en entusiastisk gjør-det-selv-er, vil du sette pris på påliteligheten og kvaliteten til denne forsänkeren. Gjør kommende prosjekter til en lek med Format Konisk Försänkare. Ready, set, sink!
Topplisten: Format Elektroverktøy tilbehør
Format Konisk Försänkare Din 335c Hss Tin 90gr 5,0mm
90° countersinks and deburring countersinks.Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DI...
189,-
Format Spiralborr Din 338 Rn Hss 15,20mm Profilslipat
Jobber drill with cyl. shank, HSS, DIN 338, bright surface, Format.Design: Bright surface, steam-tempered from 2.4 mm with precision ground point as well as high concentricity and pitch accuracy.Application: Particularly suitable for steel and steel casting (alloyed and non-alloyed) grey cast iron, malleable cast iron, nodula...
629,-
Format Bitshylsa 1/4 Insex 8x30mm
Screwdriver bit 1/4" for recessed hexagon screws.Made of chrome-vanadium steel, polished and chrome-plated, tips made of chrome-vanadium steel, burnished.
79,-
Format Planförsänkare Din 373 Hss M4 Fin Gh
180° counterbore with cyl. shank, for through hole, fine quality grade.Design: Spiral fluted with fixed pilot.Application: For countersinking inner hexagon screws DIN 912, DIN 6912 and DIN 7984 as well as cylinder screws DIN 84 (ISO 1207). Ideal for burr-free and chatter-free sinking of steel, cast iron and light metals.
199,-
Format Konisk Försänkare Din 334 C Hsse Duo+ Gt 60gr 16,0mm
60° countersinks and deburring countersinks.Design: Axial and radial relief ground. With straight, u-shaped flute length and flutes ground from solid. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring w...
809,-
Format Konisk Försänkare Din 335c Hm, Duo-Gt 90gr 12,4mm
90° countersinks and deburring countersinks set with uneven pitch, solid carbide with cyl. shank.Design: With radial relief grinding, straight flute length and flutes ground from solid.Application: Specially designed for the highest demands in INOX steel, stainless steel and Hardox 400 as well as for all ferrous and non-ferro...
1 299,-
Format Planförsänkare Din 373 Hss Tin M4 Kh
180° counterbore with cyl. shank, for core hole.Design: Spiral fluted with fixed pilot.Application: For countersinking inner hexagon screws DIN 912, DIN 6912 and DIN 7984 as well as cylinder screws DIN 84 (ISO 1207). Ideal for burr-free and chatter-free sinking of steel, cast iron and light metals.Note: The pilot of the count...
279,-
Format Planförsänkare Din 373 Hss Tin M8 Medel Gh
180° counterbore with cyl. shank, for through hole, medium quality grade.Design: Spiral fluted with fixed pilot.Application: For countersinking inner hexagon screws DIN 912, DIN 6912 and DIN 7984 as well as cylinder screws DIN 84 (ISO 1207). Ideal for burr-free and chatter-free sinking of steel, cast iron and light metals.
429,-
Format Konisk Försänkare Din 335c Hss 90gr 28,0mm
90° countersinks and deburring countersinks.Design: Axial and radial relief ground and CBN deep-ground. Also provided with cutting and clearance angles for the most common materials.Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DI...
489,-
Format Fomat Bitshylsa 1/2 Insex 5x 60mm
Screwdriver bit 1/2" for recessed hexagon screws, short.Design: DIN 7422, with ball retaining groove and knurled grip. Made of chrome-vanadium steel, chrome-plated, tips made of chrome-vanadium steel, burnished.* Non-standard size.
119,-
Spesifikasjon
Produkt
| Produktnavn | Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm |
| Merke | Format |
Populære produkter
Milwaukee packout monteringspuck
Monteringspuck til montering af alle Packout termoflasker og -kopper på flade overflader. Nem montering med skruer eller tape. To-go artikler
115,-
128,-
Pris og prishistorikk
Akkurat nå er 259,- den billigste prisen for Format Konisk Försänkare Din 335c Hsse Pm 90gr 6,3mm blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste elektroverktøy tilbehør for å være sikker på at du gjør det beste kjøpet.
Prisutvikling:
Stabil
Laveste pris:
259,-
Gjennomsnittspris:
259,-
Høyeste pris:
259,-
Beste tilbudet:
Duab.no
Tilgjengelig