Hitec 54403 Micro Switch Harness

   This is a 12" Servo Extension by Hitec.FEATURES: This allows you to extend the distance between your receiver and servo.INCLUDES: (1) ExtensionREQUIRES: Plugging into receiver and servoSPECS: Length: 12" (304mm)COMMENTS: Wire color code: Hitec-Black: negativeRed: positiveYellow: signal

 This is the Hitec HS-5086WP Waterproof Digital Micro Servo.FEATURES: All metal gears with dual ball bearings          Programmable digital amplifier with MOSFET drive          Ideal for 1/8 - 1/14 scale cars and trucks and electric powered boatsINCLUDES: HS-5086WP Servo with 1.15" (29.4mm) Two Arm Servo Horn, 0.90" (23mm)   ...

This is the Hitec Minima 6S 2.4GHz AFHSS 6-Channel Micro Receiver.FEATURESMicro receiver ideal for park planesHold function (does not have fail safe)Top pin configurationDual non-BODA antennaTwo year limited warranty beginning at date of purchaseINCLUDESHitec Minima 6S 2.4GHz AFHSS 6-Channel Receiver withInstructionsREQUIREME...

This is the HTS-SS Blue Full Telemetry Combo from Hitec.FEATURES: May be installed in nearly all electric RC aircraft including            helicopters, gliders and aerobatic planes          Uses the Hitec Adaptive Frequency Hopping Spread Spectrum (AFHSS)            that allows electric flyers to monitor a variety of informat...

This is the 2.4GHz AFHSS Hitec Optima SL S-Bus 8-Channel Single Line System Receiver.FEATURESSpecifically designed for flybarless system helicoptersDual BODA antenna systemEight slots for PWM, two slots for batteries and one slot for singlelineTelemetry functionFail safe/hold functionSupplementary power connectionSBus protoco...

This is the Hitec 2.4GHz AFHSS Maxima 9 9-Channel Low Latency Receiver.FEATURESDual M BODA (Dual Mini Boosted Omni-Directional Antenna) diversityFail Safe/Hold functionWide operation voltage, 3.7-9.0VINCLUDESHigh response, full range Hitec 2.4GHz Maxima 9 9-Channel ReceiverSPECIFICATIONSDimensions: 1.4 x 0.96 x 0.57" (37 x 24...

4Ch Aircraft Radio  The AFHSS Lite4, 4-channel radio is the perfect transmitter for beginner pilots. With its simple-to-use design and advanced 2.4GHz technology, this radio will have you flying a variety of models confidently and securely from a basic trainer to more advanced aerobatic-type aircraft. Available with our Minim...

This is the Hitec Minima 6E 2.4GHz AFHSS 6-Channel Receiver.FEATURES:Full range micro receiver ideal for small aircraftFailsafe and hold functionsEnd block configurationDual Diversity Mini Boosted Omni-Directional Antenna (M-BODA)INCLUDES:Hitec Minima 6E 2.4GHz AFHSS 6-Channel Receiver with InstructionsREQUIRES:Installing in...

This is a Hitec 24" Y-Harness Servo Extension.FEATURESOne male and two female universal connectorsINCLUDESOne Hitec 24" Y-Harness Servo ExtensionREQUIREMENTSConnection to receiver and servosSPECIFICATIONSLength: 24" (610mm)

This is the 2.4GHz Hitec Axion 2 AFHSS HHR Two Channel Receiver.  FEATURESCompatible only with the Hitec Lynx 4S transmitter Compatible only with digital servos Hitec High Response System for all RC racing applications Fail safe/hold function Two extra slots for receiver power and transponder INCLUDES2.4GHz Hitec Axion 4 Two...

More than just fun its huge fun!We developed the MULTIPLEX FunCub XL as a large multi-function high-wing aerobatic tug doubling as a fun machine. The XL boasts incredible short take-off and landing (STOL) capability. With its large, soft tundra tyres it copes with any terrain, and can be flown just about anywhere.The RR ve...

    This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.FEATURES: Constructed of composite plasticINCLUDES: One Traxxas Grey Lower ChassisREQUIRES: Installing all components onto chassisSPECS:    Length:   13.5" (343mm)          Width:     5.3" (135mm)          Thickness: 0.08"  (2mm)

NB! Denne banen er 24 kvadratmeter 6x4 meter.Modular interlocking tile design allows for infinite track configurations and easy installation.Features different top and bottom surfaces for more or less traction, which is ideal for drifting AND racing.Soft foam material is used for barriers, which minimizes damage to the Mini-Z...

aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant co...

This is the Front and Rear Skid Plates for the Traxxas Revo.FEATURES: Black plastic construction          Front skid plate is a two-piece design          Rear skid plate is a one-piece designINCLUDES: Front and read skid plates          Part #5337          (8) 3X10mm button head screws       Part #2577          (1) 3X30mm but...

Disse passer for Begge E-Maxx`ene og T-Maxx 3.3.These are the Upper Suspension Arms for the T-Maxx 3.3.FEATURES: Fastens to bulkhead and helps to support axle carriers          Black in color, constructed of hardened plasticINCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3REQUIRES: Fastening to chassisC...

1S LiPo-batteri for blant annet EMAX Tinyhawk. 500mAh kapasitet og 95C utlading. PHR/PH2.0-type kontakt.Spesifikasjoner:Kapasitet: 500mAhSpennin 1S 3.7VVekt: 14,3gramStørrelse: 60x18x8mmStrømplug JST-PHR 

Traxxas 9556XDriveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)Accessory part for these models:Sledge®

Traxxas 7075 Motor Titan 380 18-TurnesThis is the Traxxas Titan 380 18 Turn Brushed Motor. Features*Traxxas 7075 Motor Titan 380 18-Turnes*18 turn, brushed construction*Used in Traxxas 1/16 scale vehicles Specifications*Can Length: 44.7mm (1.8")*Can Diameter: 27.65mm (1.1")*Shaft Length: 9mm (0.35")*Shaft Diameter: 2.3mm (0.0...

  This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins                   for the Traxxas T-Maxx 3.3R.FEATURES: Constructed of plastic these posts and mount attach the body to the            chassisINCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw            pinsREQUIRES: Install...