Hitec HS-7950TH HV Digital Ultra Torque Coreless TG

Hitec Digital HS-7950TH for 7,4V.Digital servo fra Hitec hvor du kan bruke 2celler lipo direkte til servoen uten regulator. Meget sterk servo som leveres med titanium alloy metal gears, med 2 kulelager.Husk å sjekk at din mottaker takler 7,4V uregulert. Speed: 0,15sec/60grader på 6V, 0,13sec på 7,4VTorque: 29kg-cm på 6V, 35kg-cm på 7,4VWeight: 68gramSize: 40x20x38mmThis is the HS-7950TH High Speed, Ultra Torque Digital Servo from Hitec.FEATURES: Ideal for giant scale planes, monster trucks and rock crawlers          Coreless motor for precise centering and accuracy          G2 programmable digital circuit, programmable features include;            Dead Band Width            Speed (reduction)            Fail Safe Position         Direction (CW/CCW)            Fail Safe On/Off           End Points            Overload Protection        Resolution High/Low          Titanium gears that don"t break or develop slop like conventional            metal gears          Capable of operating on two LiPo packsINCLUDES: HS-7950TH High Speed, Ultra Torque Digital Servo with 1" (25.5mm)            single arm horn, 1" (21.5mm) aluminum single arm horn, 0.85" (32mm)            heavy duty single arm horn, 2.8" (72mm) heavy duty double arm horn,            2.3" (59mm) double arm horn, 1.8" (45mm) round horn, four eyelets,            four rubber grommets, four 2x15mm mounting screws and instruction            sheetREQUIRES: Installing in model and connecting to control linkage and receiverSPECS:    Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)          Weight: 2.40oz (68g)                   6.0V                   7.4V          Speed:  0.15 sec             0.13 sec          Torque: 403 oz/in (29kg-cm)           486 oz/in (35kg-cm)          Drivetrain Type: Dual ball bearingCOMMENTS: This servo can be programmed with any Hitec digital servo            programmer. However, the Overload Protection and Resolution High/            Low can only be programmed with the HFP-20, HPP-21            or the HPP-21+          A note on coreless motors-a conventional servo motor has a steel core            armature wrapped with wire that spins inside the magnets. In a            Coreless design, the armature uses a wire mesh that forms a cup            that spins around the outside of the magnet. This arrangement is            much lighter resulting in smoother operation and faster response            time.