Hobbywing 38020345 EzRun Combo MAX10 G2 140A - 3665SD 4000kV G3

Hobbywing Ez-Run Max10 G2 140A ESC & 3665SD G3 4000KV Motor Combo - 2-3S LiPoESC Sensor Upgrade, Great Throttle ResponseSmart technology increases heat dissipation effectivenessLarger capacitor built-in, double explosion-proofSmart freewheeling technology, higher efficiencyData logging, convenientIP67 protection, all-weather useUpgraded sensor-mode with great throttle responseThe EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors.Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more.Turbo timing adjustments: 32 DegreesSpeed is significantly increased up to 25%Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity.Large built-in capacitor = Double explosion proofCompared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode.Smart freewheeling technology, higher efficiencyThe new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation.Data logging, convenientAfter connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.ESC IP67 protection, all-weather useThe IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately.ESC Specs:Scale: 1/10Type: Brushless/SensoredWaterproof: Yes (IP67)Cont./Peak Load: 140/880AInput Voltage: 2-4S LiPoBEC: 6/7.4V @ 5AInput Wires: 12AWGOutput Wires: 12AWGInput Connector: XT60Output Connector: 4mm Gold (female bullet)Fan Size: 30x30x10mmSize: 53x39.5x37.2mmWeight: 120gFirmware Upgrade: SupportedESC Programming via:SET Button on ESC: NoLED Program Box: SupportedLCD Program Box (G2): SupportedProgramming Port: SeparateESC Applications:1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster TrucksKV Rating 3S LiPo: ≤4000kV 3665 size motorKV Rating 4S LiPo: ≤2600kV 4268 size motor EZRUN 3665SD-4000KV G3 Sensored MotorThe new generation adds performance.The evolution of a sensored motor, increases performance.The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.Motor Features:Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel.Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced.The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state.CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness.The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor.Powerful hardware configuration, efficiency is greatly improvedThe high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable.Compared to the G2 motor:The overall efficiency is increased by 3%More effective while the maximum output power has increased by 5%The motor temperature is greatly reduced under the same load conditionsThe stable power an...