Hobbywing 38030209 QuicRun Combo 10BL120 - 3652SL 5400kV G2 1/10

QuicRun Brushless WP 10BL120 G2 ESC & 3652SL G2 5400KV Motor ComboIntelligent freewheeling technology, greatly improved performanceThe innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC.Powerful built-in BECThe ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.Efficient cooling systemThe integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state.Capacitor Thermal ProtectionCapacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading.Built-in capacitorsSuper large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use.High protection level, all-weather operationThe IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.Explosive Output PowerThe output of the motor is powerful and explosive. Taking 3652-3250KV as an example and comparing it with the same specification; there is more than 10% increase in maximum output power!Excellent performance, temperature is loweredThe motor efficiency is significantly higher when comparing it with the same specification. Taking 3652-3250KV as an example, the efficiency of the rear section is 8% higher & motor temperature is lower under the same load conditions.Explosion-improved rotor design - strong and reliableThe rotor is designed with front and rear aluminum end plates, which greatly improves the overall balance. At the same time, the rotor is wound with high-strength tensile materials and has strong explosion-proof ability.Detachable design for easy maintenanceThe motor adopts a modular detachable structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor.Motor Specs:Type: 1/10, Brushless, SensorlessPoles: 4KV Ratin 5400LiPo: 2SNo Load Current: 6.8AOD: 36mmLength: 52mmShaft Diameter: 3.175mmShaft Length: 15mmConnectors: 4mm maleWeight: 224gFront Bearin OD13xID5xT4mmRear Bearin OD13xID5xT4mmApplications: 1/10 On-road, 2WD Buggy & 2WD Truck (light loads)ESC Specs:Type: 1/10, Brushless, WP, Sensorless ESCCont./Peak Current: 120A/760AInput Voltage: 2S-4S LipoBEC Output: Switch Mode 6V/7.4V @ 5AInput Wires: 12AWG-150MMInput Connector: XT60Output Connectors: 4mm Gold (female)Size: 52.8x39.8x38.2mmWeight: 119g (Included wires & connectors)Firmware Upgrade: Not SupportedMotors: Sensorless / Sensored Brushless Motor (only in sensorless mode)Vehicles: 1/10 Short course trucks & Monster trucksApplicable motors: 3652 & 3660 SizeESC Programing via:SET Button on ESC: Not SupportedLED Program Box: SupportedLCD G2 Program Box: SupportedOTA Programmer: Not SupportedProgram Port: Separate Program Port