HPI 1427 SCREW M2.6x6mm FOR COVER PLATE 8pcs

This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/8 scale Trophy Flux Truggy Racer from HPI.  FEATURES Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal rod braces Drive: Four wheel shaft, with steel outdrives and axles Motor: Flux Scream brushless 1965kV ESC: Flux Rage, handles...

Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Maverick 150037 - 56T SPUR GEARFits:THIS PART FITS THE FOLLOWING KITS / PARTS:Maverick Phantom XTMaverick Phantom XB

#150077 - FRONT LOWER SUSPENSION ARM (2PCS) THIS PART FITS THE FOLLOWING KITS / PARTS:Maverick Phantom XB

Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

150033 - DOGBONE 97.2mm (2PCS)THIS PART FITS THE FOLLOWING KITS / PARTS:Maverick Phantom XT

More than just fun its huge fun!We developed the MULTIPLEX FunCub XL as a large multi-function high-wing aerobatic tug doubling as a fun machine. The XL boasts incredible short take-off and landing (STOL) capability. With its large, soft tundra tyres it copes with any terrain, and can be flown just about anywhere.The RR ve...

aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant co...

Disse passer for Begge E-Maxx`ene og T-Maxx 3.3.These are the Upper Suspension Arms for the T-Maxx 3.3.FEATURES: Fastens to bulkhead and helps to support axle carriers          Black in color, constructed of hardened plasticINCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3REQUIRES: Fastening to chassisC...

 This is the K Parts and Roll Bar for the Toyota Hilux Kit from                             TamiyaFeatures: Black chrome plated plastic partIncludes: One roll barRequires: Mounting hardware and installation

Traxxas 9556XDriveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)Accessory part for these models:Sledge®

The Tamiya LED Light Control Unit TLU-02 enables various light effects when used with separately available Tamiya LED lights and LED Light Unit (TLU-01). The unit enhances overall appearance and realism of your electric radio control touring car. A total of 16 sets (32 lights) of LED Lights can be lit up by connecting two TLU...

1/10 Scale Brushless High-Performance Monster Truck With Traxxas Stability Management!NEW Traxxas Stability ManagementTQi 2.4GHz Radio SystemAmerica"s Most Popular Monster Truck!Waterproof Electronics for All-Weather Driving ExcitementExtreme Brushless Power For a Top Speed of 96+kmh*!Powered by PassionWe take our monster t...

This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/8 scale Trophy Flux Truggy Racer from HPI.  FEATURES Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal rod braces Drive: Four wheel shaft, with steel outdrives and axles Motor: Flux Scream brushless 1965kV ESC: Flux Rage, handles...

This is the electric powered, radio controlled, 1/10 scale, Tamiya Blitzer Beetle 2011 Off-Road Kit.FEATURES:Chassis: ABS plastic bathtub typeDrive: Rear wheelMotor: 540 sizePinion Gear: 13T metalElectronic Speed Control: Tamiya TEU-104BK with reverseDifferential: Planetary gearGearbox: SealedShocks: Oil filled CVA, plastic b...

Motorbukk for Drift/On-Road fra BSD i sterk nylon/composit/metall.

RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655XQuick Notes:Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4Does not fit the Rally ST (please see RPM #73362)Each a-arm is 6.5 grams lighter than stock*!2 packages is needed to c...