Hudy 108150 Touring Car Stand

fra 409,-

Tilgjengelig i 1 butikker

Frakt og levering

Beskrivelse

HUDY stylish touring car stand for 1/10 electric and nitro touring cars. Very nice and clean smooth design. The surface is black powder coated for maximum long life and to withstand abusive working conditions. This stand has a very small footprint and is very low profile, making it very handy to pack for travel.Four rubber feet ensure that the stand will stay firmly in place and not move while working on the car. Two super-soft foam strips bonded to the top surface ensure that the car will sit softly and will not move while you’re working on it. Laser-engraved HUDY logos adorn the stylish black powder coated surface.Four strategically placed holes on the top of the stand provide a secure placement for shocks during rebuilds. The holes are additionally laser-engraved with FL, FR, RL, and RR symbols to allow easy recognition of the different shocks to ensure you can easily identify the shocks.

Produktinformasjon

Oppdag Hudy 108150 Touring Car Stand – Det Perfekte Valget for Bilelskere!

Er du på jakt etter en premium bilsjarmeringsstand som gir deg optimal stabilitet og komfort under vedlikehold av din 1/10 elektriske og nitro touringbil? Da er Hudy 108150 Touring Car Stand det ultimate valget

Robust Design og Enestående Funksjonalitet

Hudy 108150 er designet med tanke på både stil og holdbarhet. Den svarte pulverlakkerte overflaten gir ikke bare en elegant finish, men sikrer også at stående tåler tøffe arbeidsforhold. Her er noen fantastiske funksjoner:

Kompakt størrelse: Med sitt lave profil og lille fotavtrykk er denne standen enkel å pakke med på tur.
Gummiføttene: Fire solide gummiføtter sørger for at standen står støtt og ikke beveger seg mens du jobber.
Supermyke skumstriper: Disse stripsene gir et mykt underlag for bilen din, noe som forhindrer at den glir mens du jobber på den.
Lasergravering: Med vakre Hudy-logoer og praktiske symboler for plassering av støtdempere (FL, FR, RL, RR) er alt lett tilgjengelig.

Hvorfor Velge Hudy 108150 Touring Car Stand?

Det er enkelt å se hvorfor Hudy 108150 er en favoritt blant modellbil-entusiaster! Denne standen gjør arbeidet med bilen din både lettere og mer behagelig. Den er perfekt for alle som prøver å ta vedlikeholdet av sin bil til neste nivå. Så, hvorfor nøye seg med mindre?

Vær klar for en enestående opplevelse neste gang du skal jobbe med din touringbil – Hudy 108150 Touring Car Stand sørger for at du får gjort arbeidet raskere og enklere!

Topplisten: Hudy Fjernstyrte kjøretøy

Se mer

Hudy 105525 Wheel Adapter for 1/10 Off-Road Cars 14mm

Wheel adapter for 1/10 off-road 14mm wheels for #105500 HUDY Universal Tire Balancing Station. The wheel adapter comes with a CNC-machined aluminum holder and 1-piece super-strong and precise steel rod that rotates in the ball-bearings. The hex on the wheel adapter fits precisely into the wheel and a machined tightening nut i...

379,-

Hudy 102375 Wheel Adapter 1/12 & 1/10 Pan Cars

Fits all Hudy Tire Truers, and includes locking nut.Precision center-balanced wheel adapter for 1/10 & 1/12 on-road pan car wheels features a special clamp-on, wobble-free design. Hard-anodized surface for extra long lifespan.

899,-

Hudy 181040 Spring Steel Turnbuckle Wrench 4mm

Precision 4mm turnbuckle wrench designed exclusively by HUDY from special self-developed, world-reknown HUDY Spring Steel to ensure maximum strength, durability, and long life. This turnbuckle wrench is additionally hardened to provide unmatched life span. smart fork design ensures perfect fit to 4mm turnbuckles and minim...

129,-

Hudy 105505 Wheel Adapter for 1/5 On-Road Cars & 1/6 Buggy

Wheel adapter for 1/5 On-road Car & 1/6 Buggy wheels for #105500 HUDY Universal Tire Balancing Station.The wheel adapter comes with a CNC-machined aluminum holder and 1-piece super-strong and precise steel rod that rotates in ball-bearings. The hex on the wheel adapter fits precisely into the wheel and a machined tightening n...

349,-

Hudy 102353 Wheel Adapter 1/10 All Touring Cars

includes locking nut precision center balanced wheel adapter for 1/10 touring car wheels (with 12mm hex drive) fits all Hudy Tire Truers special clamp-on design, wobble-free hard-anodized surface for extra long lifespan

669,-

Hudy 102380 Wheel Adapter 1/18 XRAY M18T M18MT

fits XRAY 1/18 truck & monster truck wheels wheel adapter for 1/18 truck & monster truck foam wheels fits all Hudy Tire Truers precision center balanced wheel adapter special clamp-on design, wobble-free hard-anodized surface for extra long lifespan includes locking alu nut

599,-

Hudy 105590 Wheel Balancing Putty

HUDY Wheel Balancing PuttyThis special balancing putty is used to perfectly balance the wheels and tires to reduce vibration. The putty is very sticky to ensure it will not fall off on the track during a run. A must have for properly balanced wheels.The putty can also be used to seal a receiver box, or protect the electronic...

139,-

Hudy 106261 Tire Additive - Tire Gripper RED - 50ml

Meget bra dekksmøring for gummidekk både på teppe og asfalt. Utviklet for situasjoner med lavt eller meget lavt grep.

405,-

Hudy 293443 Alu Clamp Throttle Servo Horn 25T Offset 2-hole Futa

HUDY Alu Clamp Throttle Servo Horn 25T Clamp designStrong & durableDrilled & tapped for 3mm linkageZero flexBlack coatedSwiss 7075 T6 aluminumCNC-machined alu throttle servo horns for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-str...

149,-

Hudy 293442 Alu Clamp Throttle Servo Horn 24T Offset 2-hole Hite

HUDY Alu Clamp Throttle Servo Horn 24T Clamp designStrong & durableDrilled & tapped for 3mm linkageZero flexBlack coatedSwiss 7075 T6 aluminumCNC-machined alu throttle servo horns for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-stro...

149,-

Spesifikasjon

Produkt

Produktnavn	Hudy 108150 Touring Car Stand
Merke	Hudy
Type	Reservedeler

Populære produkter

-1%

Flysky Fs-St8 + Sr8 Sender + Mottakersett

Flysky Transmitter FS-ST8 + Receiver SR8 Set, 8 channels AFHDS 3

1 500,-

1 516,-

Tamiya 58562 1:10 XV-01 Subaru XV EP KIT

Flint / gnistregn til sparkesykkelHer kan man la gnistene fly mens man sparkesykler - hva er vel ikke artigere for lekne jenter og gutter.Alder: 5+Kjønn: gutt og jente

79,-

Nine Eagles Solo Pro 290 General Link

Nine Eagles Solo Pro 290 (General Link) Product DescriptionThis is the Brushless Powered, TR (Transmitter Ready) Solo Pro Lama 290 Helicopter in Black and Green from Nine Eagles.This is the TR (Transmitter Ready) version that includes servos, an ESC and receiver. May be flown with any compatible transmitter with the SLT (Secu...

2 995,-

Nine Eagles Solo Pro 287 General Link

Nine Eagles SOLO PRO 287 6CH Flybarless 3D Helicopter with General Link ARTF (Red-Yellow) - 2.4GHzWork with most of the following transmitter with minimum 6CH and DSC pot (PPM output / trainer jack): Futaba, JR, Spektrum, HiTEC, WALKERA, Nine EaglesSOLO PRO 287 Features:Simple structure, easy to maintainTriaxial flybarless co...

2 695,-

Traxxas 3722A Lower Chassis Gray

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.FEATURES: Constructed of composite plasticINCLUDES: One Traxxas Grey Lower ChassisREQUIRES: Installing all components onto chassisSPECS: Length: 13.5" (343mm) Width: 5.3" (135mm) Thickness: 0.08" (2mm)

179,-

Kyosho 87051 Mini-Z Grand Prix Circuit Model 50x50 96 Mats

NB! Denne banen er 24 kvadratmeter 6x4 meter.Modular interlocking tile design allows for infinite track configurations and easy installation.Features different top and bottom surfaces for more or less traction, which is ideal for drifting AND racing.Soft foam material is used for barriers, which minimizes damage to the Mini-Z...

15 995,-

Traxxas 7075 Motor Titan 380 18-Turn

Traxxas 7075 Motor Titan 380 18-TurnesThis is the Traxxas Titan 380 18 Turn Brushed Motor. Features*Traxxas 7075 Motor Titan 380 18-Turnes*18 turn, brushed construction*Used in Traxxas 1/16 scale vehicles Specifications*Can Length: 44.7mm (1.8")*Can Diameter: 27.65mm (1.1")*Shaft Length: 9mm (0.35")*Shaft Diameter: 2.3mm (0.0...

209,-

Traxxas 5337 Skid Plate Set Revo

This is the Front and Rear Skid Plates for the Traxxas Revo.FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece designINCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part #2577 (1) 3X30mm but...

99,-

Traxxas 3678A Wheelie Bar Assembled Green

This is an optional Wheelie Bar in Green for the Traxxas Electric Stampede, Rustler and Bandit.FEATURES: Constructed of hardened plastic, neon green in color Installs at rear of chassis to prevent vehicle from flipping over during wheeliesINCLUDES: Assembled optional Wheelie Bar...

179,-

Traxxas 3695 Transmission Pro-Built Bandit Rustler Stamp Slas

Traxxas 3695 - Pro-Built 2WD TransmissionTransmission, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash)As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and mai...

859,-

Multiplex 264331 FunCub XL RR

More than just fun its huge fun!We developed the MULTIPLEX FunCub XL as a large multi-function high-wing aerobatic tug doubling as a fun machine. The XL boasts incredible short take-off and landing (STOL) capability. With its large, soft tundra tyres it copes with any terrain, and can be flown just about anywhere.The RR ve...

6 395,-

Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm 6

These are the Traxxas Flathead 3 x 8mm Screws.FEATURES: Metal construction Black in colorINCLUDES: Six 3 x 8mm Flathead Hex ScrewsREQUIRES: Installation on the vehicle

35,-

Traxxas 8095 LED Light Set Complete Pro Scale AdvancedPrepared

TRX4 Land Rover Defender LED Light SetLED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body)Kit Contents:LED lighting moduleDistribution blockDistribution block mountLED light barLED rock light harness assemblyLED headlight harness assem...

1 249,-

Gens Ace Tattu TinyHawk 1s 500mAh - 95C

1S LiPo-batteri for blant annet EMAX Tinyhawk. 500mAh kapasitet og 95C utlading. PHR/PH2.0-type kontakt.Spesifikasjoner:Kapasitet: 500mAhSpennin 1S 3.7VVekt: 14,3gramStørrelse: 60x18x8mmStrømplug JST-PHR

109,-

Traxxas 4146 Clutch Shoes/Spring Stampede

This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede. These shoes are located underneath the clutchbell.FEATURES: Black in colorINCLUDES: Two clutch shoes One wrap around springREQUIRES: Installation onto vehicle.SPECS: Length of shoe: 22.6mm (0.89") Height: 8mm (0.32"...

89,-

Pris og prishistorikk

Akkurat nå er 409,- den billigste prisen for Hudy 108150 Touring Car Stand blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste fjernstyrte kjøretøy for å være sikker på at du gjør det beste kjøpet.

Prisutvikling:

Stabil

Laveste pris:

409,-

Gjennomsnittspris:

409,-

Høyeste pris:

409,-

Beste tilbudet:

samirc.no

Ikke tilgjengelig