Protoform 603200 Crosshair - Magnetic Body Mounting Kit

fra 439,-

Tilgjengelig i 1 butikker

Frakt og levering

Beskrivelse

Crosshair Body Mounting KitHave you ever painted up a killer race body, only to botch the mounting job by aligning it off-center, crooked, or too far forward or back on your chassis?We’ve got a tool for you! The PROTOform Crosshair Body Mounting Kit uses high-powered magnets to pinpoint the exact position of your car’s body posts. This simple but effective system is designed to ensure your race body is mounted just the way you intended. Here’s how it works:Place a Crosshair Body Post Cap on each of your chassis’ 4 body posts, securing them in place with a body clip. (Not included)Place your painted body on top of the posts, centering it from left to right as well as determining the fore/aft position, which can affect handling characteristics. (Standard position would be to center the front wheel opening trim line to the front axle of your chassis)Hold a Marking Magnet on the outside of your body close to where the body posts are. The magnet will attach itself to the precise position.Mark your body post position through the hole on the Marking Magnet with a fine-tip marker.Drill your body post holes on the marked locations with a body reamer or power drillVoila! All the hassle and guesswork of mounting your race body is taken out of the equation. Now you can hit the track in style. To finish off the perfectly trimmed body, combine the Crosshair with the Better Edge System: Sanding Drum and Sanding Block!Features:Designed specifically for mounting painted r/c car bodiesPinpoint accuracy from high-powered magnetsMade from high-quality red-anodized aluminum with convenient storage boxFits most on-road chassis body posts (6 mm post diameter)Included:Crosshair Body Post Caps (4 pcs)Marking Magnets (4 pcs)Storage Box

Produktinformasjon

Protoform 603200 Crosshair - Magnetic Body Mounting Kit: Den perfekte løsningen for presis montering

Har du noen gang frustrert deg over å måtte justere RC-bilen din, kun for å oppdage at karosseriet sitter skeivt eller helt feil plassert? Med Protoform 603200 Crosshair - Magnetic Body Mounting Kit kan du si farvel til alle monteringsproblemer! Denne enkle, men effektive løsningen gir deg muligheten til å feste karosseriet ditt akkurat slik du ønsker.

Enkel montering med magnetisk presisjon

Magnetisk nøyaktighet: Høykvalitets magneter sikrer at du kan plassere karosseriet ditt på en presis og stabil måte.
Designet for racing: Spesielt utviklet for å feste malte RC-bilkaro, så du slipper å bekymre deg for sjenerende feil.
Materiale av topp kvalitet: Laget av robust rød-anodisert aluminium, som gir både styrke og stil.
Praktisk oppbevaring: Kommer med en praktisk lagringsboks for enkel oppbevaring av delene.

Hvordan bruke Protoform 603200 Crosshair

Å montere karosseriet trenger ikke å være vanskelig! Følg disse enkle trinnene:

Fest Crosshair Body Post Caps på chassisets 4 kroppsposter.
Plasser ditt malte karosseri oppå, juster det slik at det er sentrert både frem og tilbake.
Hold en Marking Magnet mot karosseriet der kroppspostene er plassert.
Merk plasseringen med en fin-tip markør og bor hullene for kroppspostene.

Passer til de fleste chassis

Protoform 603200 Crosshair - Magnetic Body Mounting Kit er kompatibel med de fleste on-road chassis med 6 mm post diameter, noe som gjør den til et ideelt valg for både nybegynnere og erfarne RC-entusiaster.

Du trenger ikke lenger å kaste bort tid på stressende montering. Med Protoform Crosshair får du en presis og elegant løsning som gjør at du kan nyte racingopplevelsen til det fulle!

Topplisten: Proline Fjernstyrte kjøretøy

Se mer

Pro-Line 273301 Desperado 2733-01 3.8" Chrome 1/2" Offset 17mm

This is a pair of Pro-Line 3.8" Desperado Wheels with Traxxas Style Bead.FEATURES: Constructed of nylon with a molded-in beadlock ring for scale look Six spoke design, with chrome finish 1/2" (13mm) offset for the Traxxas Summit fans INCLUDES: Two Pro-Line 3.8" Desperado Wheels with Traxxas Style Bead REQUI...

229,-

Pro-Line 609202 Transmission Gear Cover & Plug Replacement Kit

This is the Transmission Gear Cover and Plug for the Pro-Line Performance Transmission for the Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler.FEATURES: Clear gear cover Rubber plugINCLUDES: Transmission Gear Cover and Plug

99,-

Pro-Line 609206 Transmission Differential Internal Gear Set

1/10 Diff Internal Gear Replacement Set: PRO Performance TransmissionThis is the Transmission Diff Gear Set for the Pro-Line Performance Transmission for the Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler.Features: This is a pack of Replacement Internal Differential Gears, Pins and Shafts for Pro-Lines Transmissi...

219,-

Pro-Line 609208 Transmission Differential Seal Kit

These are the Transmission Diff Seal Kit for the Pro-Line Performance Transmission for the Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler.FEATURES: Fiber, silicone, and aluminum constructionINCLUDES: Two Fiber Gaskets, eight Spacers, four O-Rings

79,-

Pro-Line 609209 Transmission Top Shaft Component Kit

This is the Transmission Top Shaft Kit for the Pro-Line Performance Transmission for the Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler.FEATURES: Steel and aluminum constructionINCLUDES: Two Discs, Topshaft, Spring, Locknut, Sleeve and Spacer

399,-

Pro-Line 348217 Pre-Cut 2017 Ford F-150 Raptor Clear X-Max

This is the Pro-Line Clear 2017 Ford F-150 Raptor Body.FEATURESFits the Traxxas X-MaxxMolded from genuine clear GE lexanAggressive scale body detailFull color body trim and logo decal sheetPrecutINCLUDESClear 2017 Ford F-150 Raptor Body, Decal and Window Mask SheetsREQUIREMENTSBody ReamerLexan safe spray or brush-on paintSPEC...

995,-

Pro-Line 349500 Interior Clear for 1/10 Crawler Bodies

This is a Classic Interior for Rock Crawling Bodies. Pro-Line is proud to introduce a Classic Interior for all of our old-school Scale Truck Fans! The Classic Interior features a Bench style front seat for added scale realism and fits perfectly with Pro-Lines 1966 Chevrolet C-10 body and other Classic Truck Cabs! The dash a...

482,-

Pro-Line 349815 Pre-Cut Monster Fusion Bash Armor Body White

Pre-Cut Monster Fusion Bash Armor Body (White) for PRO-Fusion SC 4x4, Slash 2wd & Slash 4x4 with 2.8" MT TiresThis is a Monster Fusion Bash Armor Body for SC with 2.8" MT Tires. Do you love using huge 2.8" Tires and Wheels on your Slash® or Slash® 4x4 but hate ripping up your SC body due to tire rub? Then we have the body for...

1 295,-

Pro-Line 349918 1946 Dodge Power Wagon Tough-Color Black Body

1946 Dodge Power Wagon Tough-Color (Black) Body for 12.3" (313mm) Wheelbase Scale CrawlersThis is a 1946 Dodge Power Wagon Tough-Color Black Body for Crawlers. Pro-Line is proud to introduce the 1946 Dodge Power Wagon Black body for Scale Crawlers made from completely black polycarbonate Tough-Color material! This First Gen P...

999,-

Pro-Line 609215 Optional 82T Spur Gear Perf Trans

This is the optional 82 Tooth Spur Gear for the Pro-Line Performance TransmissionFEATURES: Nylon construction Replaces stock 86 tooth spur gear Allows gearing to be changed for different track conditions or motor configurations INCLUDES: 82 Tooth Spur Gear

68,-

Spesifikasjon

Produkt

Produktnavn	Protoform 603200 Crosshair - Magnetic Body Mounting Kit
Merke	Proline
Type	Reservedeler

Pris og prishistorikk

Akkurat nå er 439,- den billigste prisen for Protoform 603200 Crosshair - Magnetic Body Mounting Kit blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste fjernstyrte kjøretøy for å være sikker på at du gjør det beste kjøpet.

Prisutvikling:

Stabil

Laveste pris:

439,-

Gjennomsnittspris:

439,-

Høyeste pris:

439,-

Beste tilbudet:

samirc.no

Tilgjengelig