RPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces TRX

RPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces TRX

RPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces stock Traxxas #3920 & #4969Quick Notes:see Version Identification below for important fitment information.replaces stock Traxxas #3920 & #4969 The extended chassis braces of newer versions of both the T-Maxx and E-Maxx would not allow our original center skid plat......
fra 119,-
Tilgjengelig i 1 butikker
Frakt og levering
Beskrivelse
RPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces stock Traxxas #3920 & #4969Quick Notes:see “Version Identification” below for important fitment information.replaces stock Traxxas #3920 & #4969 The extended chassis braces of newer versions of both the T-Maxx and E-Maxx would not allow our original center skid plate to bolt up to either of these trucks without modification. After quite a bit of prodding from our customers, we now have a new center skid plate and skid plate set designed specifically for modern, stretched chassis editions of the T-Maxx & E-Maxx.Unlike the stock center skid plate, our new molded center skid plate extends over the predominance of the chassis braces with better than 4mm of bulletproof RPM protection! The molded curves of our skid plate perfectly mate with the chassis support rails and act as a reduced-friction transition surface that prevents objects from hooking the stock rear skid plate. Other great features include: deep recessed screw holes help eliminate damage to the mounting screw heads, a matched grooved finish from the front of the truck to the rear and provide outstanding wear and impact resistance. The center skid plate provides a more solid tie between the two chassis braces for added support and rigidity. Additionally, since our center skid plate runs the rearward length of the chassis braces, less dirt and debris will be forced into the rear skid plate area of the chassis, improving driveline durability and drive shaft bearing longevity.RPM skid plates are molded in either blue or black and sold with all necessary mounting hardware (1/8″ dia. drill not included). Like all RPM molded products, RPM skid plates are proudly made in the USA. Proven durability at competitive prices!Tech Notes: The E-Maxx & T-Maxx use different mounting hole locations for the center mounting screws. We left the mounting holes blind to prevent dirt build up in the holes that aren’t used. A 1/8” diameter drill is required to drill out the correct mounting holes for the vehicle the skid plate will be mounted on. For older version T-Maxx, E-Maxx & S-Maxx trucks, our original T/E-Maxx Center Skid Plates (#80142 & #80145) are the correct length for the chassis side rails of those versions.Version Identification: Not sure if these are the correct skid plates for your truck? There’s an easy way to tell. If your chassis braces (Traxxas #4963) have the word “MAXX” molded into it, these are the correct version skid plates for you. If “MAXX” is not present, you need RPM #80142 or #80145.Important Note: RPM skid / wear plates require the use of stock, plastic skid plates, bulkheads and (for center skid plates) chassis braces. RPM skid plates will work with most aftermarket aluminum front & rear skid plates but RPM guarantees the fit only when used with stock parts. 

Produktinformasjon

RPM 80892 Center Skid Plate for T-Maxx & E-Maxx

Er du på utkikk etter en holdbar reservedel til din T-Maxx eller E-Maxx? Se ikke lenger enn til RPM 80892 Center Skid Plate! Denne erstatter de originale Traxxas #3920 og #4969, og er designet med tanke på moderne chassis. Du slipper å bekymre deg for at skid-platen skal svikte deg under bruk.

Skreddersydd for moderne chassis

Med den forsterkede konstruksjonen og perfekte passformen til nyere modeller, gir denne skid-platen deg den nødvendige beskyttelsen. Den går over de fleste av chassis-breiningspunktene, og tilbyr mer enn 4 mm med RPM-beskyttelse. Tenk på det som en solid rustning for din bil. Den er laget for å tåle både slitasje og støt, noe som gjør den til et perfekt valg for off-road eventyr.

Funksjoner som imponerer

  • Innovativ design: Den strømlinjeformede formen reduserer friksjon og hindrer at gjenstander hekter seg fast.
  • Recessed screw holes: Dype skruhull forhindrer skade på skruene.
  • Fargevalg: Tilgjengelig i både blå og svart, så du kan velge den stilen som passer deg best.
  • Installasjonsvennlig: Alt nødvendig monteringstilbehør følger med.

Optimal ytelse med RPM 80892

Ved å investere i RPM 80892 Center Skid Plate, sikrer du ikke bare beskyttelse, men også en forbedret ytelse for din T-Maxx eller E-Maxx. Den gir et solid bånd mellom chassis-breinene, som gir ekstra støtte og stivhet. Dessuten reduseres mengden smuss og rusk som kommer inn i bakområdet, noe som forbedrer holdbarheten til drivlinjen din.

Ikke glem!

Husk at denne skid-platen er designet for bruk med originale, plastiske skid-plater og chassis-breinsskinner. RPM garanterer passform kun når delen brukes med originale deler, så vær sikker på at du tar de riktige valgene.

Er du klar for å oppgradere ditt T-Maxx eller E-Maxx? Velg RPM 80892 Center Skid Plate for en enestående kombinasjon av stil, beskyttelse og ytelse!

Spesifikasjon

Produkt
ProduktnavnRPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces TRX
MerkeRpm
TypeReservedeler

Pris og prishistorikk

Akkurat nå er 119,- den billigste prisen for RPM 80892 Center Skid Plate for the T-Maxx & E-Maxx replaces TRX blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste fjernstyrte kjøretøy for å være sikker på at du gjør det beste kjøpet.

Prisutvikling:
Stabil
Laveste pris:
119,-
Gjennomsnittspris:
119,-
Høyeste pris:
119,-
Beste tilbudet:
samirc.no
Tilgjengelig