Tamiya 47429 1/10 Porsche 911 GT3 Cup 2008 TT-01E 4WD No ESC

Tamiya 47429 1/10 Porsche 911 GT3 Cup 2008 TT-01E 4WD Leveres med torque tuned motor.Byggesett av Porsche 911 GT3 Cup 2008 , du trenger i tillegg til kitet for å få det komplett:1 x servo anbefalt minst 6.5kgEsc(fartsregulator)Radio/MotakerBatteri og Lader 7.2V Nimh eller 7.4V Lipo(2S) Lader for valgt batteri1-2 bokser lakk (PS)Se anbefalt tilbehør under relaterte produkter. Tamiya 1/10 RC Porsche 911 GT3 Cup Car 2008 (TT-01 Chassis TYPE-E)Machine for the highest peak one-make race A 911 GT3 cup car developed for the highest peak "Porsche Supercup" of one-make races held in 10 countries around the world and delivered to private teams. Above all, it is an assembly kit of an electric radio control car that reproduces the VIP car that Porsche manages the machine and the invited player drives for each race. The body and large rear wing, which are modeled with a powerful form, are made of polycarbonate. The door mirror is a separate resin part. In addition, the front and rear light cases are plated resin parts to which LED lights (sold separately) can be attached. The high scale feeling is attractive. In addition, gold and white pinstripes and Porsche logos that tighten the flat white body are prepared with stickers.Shaft drive 4WD TT-01 TYPE-E chassis adopted, which is fun to improve performanceThe chassis is a vertical motor shaft drive 4WD TT-01 TYPE-E that is easy to assemble and easy to maintain. For the bathtub type main frame, Equipped with a glass fiber reinforced nylon resin upper deck and gear cover to give high chassis rigidity. The steering system is a 3-split type with little play and smooth movement. Low center of gravity, well-balanced body configuration and double wishbone 4 Combined with the wheel independent suspension and the differential gears installed on the front and rear, it demonstrates controllable maneuvering characteristics. In addition, the rear has a wide tread specification using a long wheel axle. In addition, the mesh-designed wheels that complement your feet are fitted with leshy slick tires. I am looking forward to improving the performance by incorporating a wide variety of optional parts (sold separately) for the TT-01 TYPE-E.  Basic specificationsOverall length 465mm, overall width 195mm, overall height 134mmWheel base 251mm (short wheel base specification)Tread = front 157mm, rear 165mm (rear wide tread specification)Tire width / diameter = front and rear 27 / 67mm ● Frame = bathtub typeDrive system = vertical motor / shaft drive full-time 4WDDiff gear = 3 bevels for both front and rearSteering = 3-split tie rod typeSuspension = 4-wheel double wishboneDamper = friction for both front and rearGear ratio = 8.35: 1Motor = 540 typeSpeed ​​controller = ESC (sold separately)A polycarbonate body that fully reproduces the glamorous form.The resin door mirror tightens the form.Slick tires are attached to the mesh design wheels. Tire marks are also available.Rear end that reproduces the shape of the duck tail. The large rear wing is made of polycarbonate.The upright is a dedicated part for the TT-01 TYPE-E, which has high strength and little backlash. Separately Required Items2-Channel R/C System w/ESC R6/AA/UM3 batteries for transmitter Battery Pack & Charger