Tascam Sonicview 16

Tascam Sonicview 16, Digital Mixer, AD/DA conversion: 32 bit / 96 kHz, Tascam HDIA microphone preamplifier (High-Definition Instrumentation Architecture), FPGA mixing engine with 54-bit floating-point processing and 96 kHz sampling rate, 44 Input channels (40 mono, 2 stereo), 22 Flexible output busses + stereo sum with 31-band graphic EQ, Visual Interactive Ergonomic Workflow (VIEW) interface provides intuitive operation with three view modes, Multiple simultaneous views via two 7-inch colour touchscreens, Latency: 2 × Fs (20.8 µs) in mixing engine, 0.51 ms analogue-to-analogue, Integrated Dante interface with 64 inputs and outputs (supports redundancy, AES67, DDM and SMPTE 2110), USB audio interface with 32 inputs and outputs, Internal two-track recording/playback to SD card or USB drive, Four multi-effects processors, 16 + 1 100 mm motorised faders, 16 Encoders with colour LEDs, 16 LC displays with colour LEDs for channel names as well as displays for input level and dynamic level reduction, 18 Individually assignable buttons, Seven user-defined fader levels and eight DCA groups, Gigabit Ethernet connection (1000 BaseT), Remote control and offline editing via Tascam Sonicview software for Windows, macOS and iOS, Two Tascam expansion slots (expansion cards available for 32-track SDXC recorders as well as MADI, AES/EBU and analogue signals - not included), Power switch with protection, Dimensions (W x H x D): 472 x 228.1 x 554.4 mm, Weight: 13 kg@+@+*Connections:*@+@+, 16x Balanced 3-pin XLR mic/line input, 8x Balanced 6.3 mm jack line input, Max. input level: +32 dBu, 2x 6.3 mm jack insert, 3-Pole XLR talkback input, 2x RCA stereo inputs L/R, 16x Balanced 3-pole XLR line output, 6.3 mm jack stereo headphone output, 3.5 mm jack stereo headphone output, 2x 3-pole XLR monitor output, Max. output level: +24 dBu, 4-pole XLR lamp connection, 6.3 mm jack Footswitch connector, BNC socket Wordclock-In, BNC socket Wordclock-Out/Thru, 2x USB connector (type-B and type-C), GPIO with eight inputs/outputs via Sub-D25 connector