Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2

Frakt og levering

Beskrivelse

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas.FEATURES: Machined aluminum construction Anodized red in colorINCLUDES: Two Aluminum Rear Stub Axle Carriers Two 3x3mm Set Screws Two 3x12mm Flat Phillips Head Screws Two 3x31.5mm Pins Six 6mm E-Clips

Produktinformasjon

Oppdag Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2

Er du på jakt etter pålitelige og stilige reservedeler til RC-bilen din? Da er Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2 det perfekte valget for deg! Disse bakakslingene kombinerer funksjonalitet med et lekkert design, slik at du kan oppgradere ytelsen på din modellbil.

Spesifikasjoner og egenskaper

Type: Reservedeler
Materiale: Maskinbearbeidet aluminium
Farge: Rød anodisert finish for stil og holdbarhet
Inkludert i pakken:
- To aluminium bakakslingstragere
- To 3x3mm settskruer
- To 3x12mm flate Phillips-hodeskruer
- To 3x31,5mm pinner
- Seks 6mm E-klips

Hvorfor velge Traxxas 1952A Carriers?

Når det kommer til RC-biler, er kvalitet og ytelse essensielt. Traxxas 1952A Carriers er laget av slitesterkt aluminium, noe som gir overlegen styrke uten å gå på bekostning av vekt. Den røde anodiserte overflaten gir ikke bare en imponerende estetikk, men bidrar også til å beskytte mot rust og slitasje.

Er du usikker på hva som skiller disse fra andre alternativer på markedet? Tenk på dem som solid ballast for din RC-bil, som ikke bare gir støtte, men også en ekstra dose stil!

Optimal ytelse med Traxxas 1952A

Enten du kjører på banen eller tar en tur i parken, sikrer disse akslingstragerne trygg og stabil drift. Ved å oppgradere med Traxxas 1952A Carriers, vil du oppleve en markant forbedring i håndteringen av bilen din – noe som betyr flere spennende øyeblikk og mindre tid med reparasjoner.

Gjør deg klar for en forbedret RC-bilopplevelse med Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2 - stilige, sterke, og laget for de som ikke aksepterer kompromisser!

Topplisten: Traxxas Fjernstyrte kjøretøy

Se mer

Traxxas 3722A Lower Chassis Gray

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.FEATURES: Constructed of composite plasticINCLUDES: One Traxxas Grey Lower ChassisREQUIRES: Installing all components onto chassisSPECS: Length: 13.5" (343mm) Width: 5.3" (135mm) Thickness: 0.08" (2mm)

179,-

Traxxas 9532A Caster Blocks C-Hub Alu Grey L+R Sledge

aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant co...

939,-

Traxxas 9556X Driveshaft Center CV Rear for Driveshaft #9655X

Traxxas 9556XDriveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)Accessory part for these models:Sledge®

199,-

Traxxas 4914R Front Body Mount Posts T-Maxx 3.3

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R.FEATURES: Constructed of plastic these posts and mount attach the body to the chassisINCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw pinsREQUIRES: Install...

75,-

Traxxas 5131R Suspension Arms Upper Maxx 2

Disse passer for Begge E-Maxx`ene og T-Maxx 3.3.These are the Upper Suspension Arms for the T-Maxx 3.3.FEATURES: Fastens to bulkhead and helps to support axle carriers Black in color, constructed of hardened plasticINCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3REQUIRES: Fastening to chassisC...

89,-

Traxxas 5337 Skid Plate Set Revo

This is the Front and Rear Skid Plates for the Traxxas Revo.FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece designINCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part #2577 (1) 3X30mm but...

99,-

Traxxas 5234 Carburetor Body/Plug/O-Ring Traxxas 2.5

This is the replacement Right Side Electronics Box for the Traxxas Revo. These parts attach directly to the chassis. FEATURESBlack plastic construction INCLUDESOne right electronics box One box cover/charge jack plug Three pieces of adhesive backed foam padding REQUIREMENTSNothing. These are direct replacement parts. COMMENTS...

99,-

Traxxas 7471 Tires BFGoodrich Rally gravel pattern 2/ foam i

Tires, BFGoodrich Rally, gravel pattern (2)/ foam inserts (2)

239,-

Traxxas 6880 Rear Differential Housings Slash 4X4

These are the Differential Housingsfor the NHRA Funny Car Race Replica from Traxxas.FEATURESPlastic construction, black in colorINCLUDESTwo Differential HousingsFour 2.6x23mm ScrewsOne Spacer

49,-

"BULK" Traxxas 1651 Komplett aksel til Bandit 1stk

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***Dette er en komplett aksel til Traxxas Bandit VXL (1 stk)

149,-

Spesifikasjon

Produkt

Produktnavn	Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2
Merke	Traxxas
Type	Reservedeler

Populære produkter

Multiplex 264331 FunCub XL RR

More than just fun its huge fun!We developed the MULTIPLEX FunCub XL as a large multi-function high-wing aerobatic tug doubling as a fun machine. The XL boasts incredible short take-off and landing (STOL) capability. With its large, soft tundra tyres it copes with any terrain, and can be flown just about anywhere.The RR ve...

6 395,-

Traxxas 3722A Lower Chassis Gray

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.FEATURES: Constructed of composite plasticINCLUDES: One Traxxas Grey Lower ChassisREQUIRES: Installing all components onto chassisSPECS: Length: 13.5" (343mm) Width: 5.3" (135mm) Thickness: 0.08" (2mm)

179,-

Traxxas 9532A Caster Blocks C-Hub Alu Grey L+R Sledge

aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant co...

939,-

Traxxas 9556X Driveshaft Center CV Rear for Driveshaft #9655X

Traxxas 9556XDriveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)Accessory part for these models:Sledge®

199,-

Traxxas 4914R Front Body Mount Posts T-Maxx 3.3

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R.FEATURES: Constructed of plastic these posts and mount attach the body to the chassisINCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw pinsREQUIRES: Install...

75,-

Traxxas 5131R Suspension Arms Upper Maxx 2

Disse passer for Begge E-Maxx`ene og T-Maxx 3.3.These are the Upper Suspension Arms for the T-Maxx 3.3.FEATURES: Fastens to bulkhead and helps to support axle carriers Black in color, constructed of hardened plasticINCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3REQUIRES: Fastening to chassisC...

89,-

Traxxas 5337 Skid Plate Set Revo

This is the Front and Rear Skid Plates for the Traxxas Revo.FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece designINCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part #2577 (1) 3X30mm but...

99,-

BSD 213-007 Lower Susp. Arm Unit

119,-

BSD 205-028 Motor Bracket Assembly

Motorbukk for Drift/On-Road fra BSD i sterk nylon/composit/metall.

239,-

Pris og prishistorikk

Akkurat nå er 329,- den billigste prisen for Traxxas 1952A Carriers Stub Axle Red Anodized Rear 2 blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste fjernstyrte kjøretøy for å være sikker på at du gjør det beste kjøpet.

Prisutvikling:

Stabil

Laveste pris:

329,-

Gjennomsnittspris:

329,-

Høyeste pris:

329,-

Beste tilbudet:

samirc.no

Tilgjengelig