Castle Creation MAMBA Micro X2 16,8V WP Sensored ESC 3,5

Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, 3,5Putting the X in Extreme!The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors.FEATURES:Input Voltage range 2S-4SAdjustable: 5.5V or 7.5V (2A Peak), default 5.5VWaterproof design.Sensored Motor capable (with optional sensor harness)Convenient transmitter programming for six common adjustable settings.Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.Audible Alerts that will notify you of possible issues with calibrations and error conditions.Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.Mamba Micro X2  ESC Purchase Includes:Mamba Micro X2 ESC with 3.5mm connectorsCoupon for free Castle Link USB adapterQuick Start GuideCastle DecalsMAMBA MICRO X2, 16.8V, WP SENSORED ESCPutting the X in Extreme! The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors.FEATURES:Input Voltage range 2S-4SAdjustable: 5.5V or 7.5V (2A Peak), default 5.5VWaterproof design.Sensored Motor capable (with optional sensor harness)Convenient transmitter programming for six common adjustable settings.Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.Audible Alerts that will notify you of possible issues with calibrations and error conditions.Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.Mamba Micro X2  ESC Purchase Includes:Mamba Micro X2 ESC with 3.5mm connectorsCoupon for free Castle Link USB adapterQuick Start GuideCastle Decals*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.Technical SpecsInput Voltage Range:2S-4S LiPo (16.8V Max)BEC Specifications:Adjustable; 5.5V or 7.5V (default 5.5V) 2A PeakOperating Environment:Waterproof* design allows for use in nearly any environmentBrake:ProportionalReversible:Yes, but may be disabledOn/Off Switch:Yes, waterproofCooling Fan:Not includedSize (L x W x H):41.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x .84")Weight (with wires):1.66 oz / 47 gramsConnectors:3.5 mm bulletsItems Needed for Operation:Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended.Product Use Statements:Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty.Minimum recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.Application Guidelines:1:18 scale RC hobby vehicles weighing up to 2.25lbs.Recommended Motors:Castle 0808 4100Kv: Max Cells: 3S Lipo or 8 NiMHCastle 0808 5300Kv: Max Cells: 3S Lipo or 8 NiMHCastle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMHMax. Recommended Vehicle Weight:2.25 lbs...