Propellpaar A2 og B2

Robart 305 Hinge PointHinge Point Hinges are truly unique. Instead of trying to chisel a slot, as with ordinary hinges, simply drill a hole, add some glue and insert the hinge point. Simple, perfectly straight hinging can be done quickly.1/2A 3/32" Hinge Points (6 package)Available in three sizes 3/32", 1/8" & 3/16"

  These are M4x5mm Set Screws for the               Thunder Tiger Raptor 60 and Raptor 90 Helicopters.FEATURES: Steel construction          Black in colorINCLUDES: Twenty M4x5 set screwsREQUIRES: Installation into helicopter

Komplett RTF!GyroPerfekt for nybegynneren!WarbirdTop RC Hobby her med en komplett liten warbidpakke for nybegynner og erfaren! Med skrog i EPP-skum tåler flyet virkelig en støyt, og skulle du virkelig være uheldig er det som regel ikke verre enn å lime og teipe deler sammen igjen. Med gyrostabilisering aktivert får man en meg...

Right 1/12 ServoFits:RT94401 - 1/12 Monster TruckRT94402 - 1/12 Buggy

GenereltProdukttypeFlashminnekortLagringskapasitet16 GBKompatibilitetUspesifikkMinneSD Speed ClassClass 10LesehastighetInntil 80 MB/sProduktformfaktorSDHC UHS-I Memory CardEgenskaperStøtsikker, vanntett, skrivebeskyttelsessvitsj, Røntgensikker, temperatursikkerDiverseKompatibel med Windows 7"Kompatibel med Windows 7" software...

This is the Tactic TR624 2.4GHz Six Channel Receiver.FEATURESCompatible with the Tactic TTX404, TTX600, and TTX650 stick transmittersBuilt-in bind button with red LED status indicatorProgrammable fail-safeNo crystal requiredVery lightweightINCLUDESTactic TR624 2.4GHz 6-channel receiverREQUIREMENTSInstallation and connecting b...

More than just fun its huge fun!We developed the MULTIPLEX FunCub XL as a large multi-function high-wing aerobatic tug doubling as a fun machine. The XL boasts incredible short take-off and landing (STOL) capability. With its large, soft tundra tyres it copes with any terrain, and can be flown just about anywhere.The RR ve...

aster blocks (c-hubs), 6061-T6 aluminum (dark titanium-anodized), left & right/ kingpin bushings (4)Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant co...

Disse passer for Begge E-Maxx`ene og T-Maxx 3.3.These are the Upper Suspension Arms for the T-Maxx 3.3.FEATURES: Fastens to bulkhead and helps to support axle carriers          Black in color, constructed of hardened plasticINCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3REQUIRES: Fastening to chassisC...

 This is the K Parts and Roll Bar for the Toyota Hilux Kit from                             TamiyaFeatures: Black chrome plated plastic partIncludes: One roll barRequires: Mounting hardware and installation

Traxxas 9556XDriveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts)Accessory part for these models:Sledge®

The Tamiya LED Light Control Unit TLU-02 enables various light effects when used with separately available Tamiya LED lights and LED Light Unit (TLU-01). The unit enhances overall appearance and realism of your electric radio control touring car. A total of 16 sets (32 lights) of LED Lights can be lit up by connecting two TLU...

1/10 Scale Brushless High-Performance Monster Truck With Traxxas Stability Management!NEW Traxxas Stability ManagementTQi 2.4GHz Radio SystemAmerica"s Most Popular Monster Truck!Waterproof Electronics for All-Weather Driving ExcitementExtreme Brushless Power For a Top Speed of 96+kmh*!Powered by PassionWe take our monster t...

This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/8 scale Trophy Flux Truggy Racer from HPI.  FEATURES Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal rod braces Drive: Four wheel shaft, with steel outdrives and axles Motor: Flux Scream brushless 1965kV ESC: Flux Rage, handles...

This is the electric powered, radio controlled, 1/10 scale, Tamiya Blitzer Beetle 2011 Off-Road Kit.FEATURES:Chassis: ABS plastic bathtub typeDrive: Rear wheelMotor: 540 sizePinion Gear: 13T metalElectronic Speed Control: Tamiya TEU-104BK with reverseDifferential: Planetary gearGearbox: SealedShocks: Oil filled CVA, plastic b...

Motorbukk for Drift/On-Road fra BSD i sterk nylon/composit/metall.

RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655XQuick Notes:Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4Does not fit the Rally ST (please see RPM #73362)Each a-arm is 6.5 grams lighter than stock*!2 packages is needed to c...