Tamiya 58561 TA06 Petronas Syntium Mercedes-Benz SLS AMG GT3

The Mercedes-Benz SLS AMG GT3 is a racing machine based on the production SLS AMG, which debuted in September 2009. Its long-nose, bobtail body design features gull-wing doors and a front-mounted 6.2-liter V8 engine. This particular racing car was entered into the 2012 Japan Super Taikyu Series of endurance races by the Petronas Syntium Racing Team. The team impressively took five consecutive wins at the start of the season on its way to claiming the championship title.The TA-06 serves as the advanced chassis platform for this particular kit. Compared to the TT-01 Type E chassis, which the Mercedes Benz SLS AMG GT3 is also available, the TA-06 has a dual drive train, advanced suspension geometry and various setting options that will enable the user to achieve higher performance both on and off the track.Specs and Features    Oil filled Dampers    4WD, independent double wishbone suspension system    Dog-bone drive axles.    Low-Friction Drive Belts (174mm, 453mm)    Aluminum Motor Plate    Full Ball Bearings    Steel Turnbuckle Shafts    Steel Ball Connectors    Standard Servo Saver    The motor (not included) is installed at the mid-rear position which helps improve traction for the rear wheels.    Comes equipped with aluminum motor plate and aluminum spur gear holder from the TA-05 chassis platform.    Highly detailed polycarbonate body shell, rear wing and light cases included.    Sticker and masking sticker sheets included.    Separately-molded side mirrors included.    Suspension parts from the previous TA-05 platform are used on the new TA-06. (short reversible suspension, steering blocks, castor blocks and optional aluminum suspension mounts) are all transferable    Molded plastic parts are made of durable FRP (Fiberglass Reinforced Plastic)    Chassis battery compartment is compatible with NiCd, NiMh, LiFe and LiPo battery technologies.    The battery pack can be accessed from the underside of the chassis by removing the battery cover.    Two front suspension configurations: IFS (Inboard Front Suspension using rocker arms) and Standard outboard suspension is possible with the kit-included damper stay parts.ELECTRIC KITS REQUIRE:(unless stated differently above)    Radio Gear: 2-Channel Surface System with receiver, servo and ESC (NOT INCLUDED)    Power Source: Battery Pack (NOT INCLUDED), requires batteries for transmitter (NOT INCLUDED)    Motor: Type 540 (NOT INCLUDED)    Charger: AC/DC timed or peak for battery pack (NOT INCLUDED)    Paint: PS for Polycarbonate/TS for ABS (NOT INCLUDED)    Misc. Items: Building and track equipment (NOT INCLUDED)