Castle Creations 010015502 Mamba X 25.2 WP ESC/1406-5700kV Motor

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC, and the 1406 5700Kv Sensored Brushless Motor.NOT for use in 4WD short course trucks.For 2WD short course trucks on 2S LiPos geared conservatively, 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and limited runs on 3S LiPos with conservative gearing, also ideal for 1/10 scale on road cars running on 2S and 3S LiPo power.FEATURESESC;2S - 6S input voltage rangeCompatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs(4kg), including many extreme 1/10 scale setups and 1/8 scale racebuggiesSmartsense uses motor"s sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorlessmode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditionsOn-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while drivingRecordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and moreAudible alertsCNC aluminum case12AWG high strand count silicone insulated battery wiresMotor;High-strength neodymium sintered magnet with Kevlar wrapHigh-performance 0.2mm steel lamination stacked statorCastle 13 AWG silicone insulated wire leadsOversized NMB bearingsFour pole configuration for maximum efficiency at high RPMCNC machined 6061-T6 aluminum front and rear endbellsINCLUDESMamba X Extreme 1/10 scale Electronic Speed ControlReplaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof SwitchReplaceable Motor Sensor Harness12AWG Battery WiresCooling Fan4mm Gold Plated Bullet Motor Connectors1406 5700Kv Sensored Brushless MotorSensor WireSPECIFICATIONSESC;Input Voltage Range: 2S - 6S LiPoBEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5VProgrammable: Fully programmable with Castle Link USB Adapter, and downloadable Casle Link Windows softwareTelemetry Link Capable: YesBrake: ProportionalReverse: Yes, may be disabled for racingCooling Fan: 1.2" (30mm) removableDimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to runMotor;Input Voltage Range: 2-3S LiPo,Kv: 5700Max. RPM: 100,000Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTRLength: 1.9" (49.5mm)Diameter: 1.4" (36mm)Weight with Wires: 7.1oz (202g)Shaft Diameter: 1/8" (3.17mm)Shaft Length: 0.59" (15mm)Mounting Hole Specifications: M3 @ 25mmConnectors: 4mm Male Castle BulletCOMMENTSWaterproof under normal operation. Not intended for operation when completely submerged in water.