Silikon slange 12,5mm x 18,5mm 3mm veggtykkelse. ID 1/2"
This silicone hose is resistant to constant high temperatures (over 200C) and has good chemical resistance. The soft easy work with seals very well. great for transferring beer from fermenter keg will fit onto the standard tap or 13mm barbs. It also recommended handling spirits distillation applications as it does not leach p......
fra 99,-
Tilgjengelig i 1 butikker
Betalingsalternativer
Frakt og levering
Produktinformasjon
This silicone hose is resistant to constant high temperatures (over 200C) and has good chemical resistance. The soft easy work with seals very well. great for transferring beer from fermenter keg will fit onto the standard tap or 13mm barbs. It also recommended handling spirits distillation applications as it does not leach plasticisers like vinyl tubing. Internal diameter 12.5mm outside of 18.5mm. Note: should be used higher pressures above 20psi (such mains water pressure). a burst pressure approximately 35psi. Clamps suitable this being attached barb are the: 20.5mm Stepless Hose
Topplisten: Kegland Ølbrygging
Spesifikasjon
Produkt
| Produktnavn | Silikon slange 12,5mm x 18,5mm 3mm veggtykkelse. ID 1/2" |
| Merke | Kegland |
Pris og prishistorikk
Akkurat nå er 99,- den billigste prisen for Silikon slange 12,5mm x 18,5mm 3mm veggtykkelse. ID 1/2" blant 1 butikker hos Prisradar. Sjekk også vår topp 5-rangering av beste ølbrygging for å være sikker på at du gjør det beste kjøpet.
Slangesett for lukket overføring med flowstopper inkludert!Ekstra Lokk til Tilt Hydrometer Reservedel til Tilt hydrometerTable holder for 3 single skewer Holder for 3 grillspydBraai Gloves Hansker mot varme
Château Cara Blond 1 kg hel 20 EBC - Castle maltingChâteau Cara Blond 1 kg knust 20 EBC - Castle maltingChâteau Cara Blond 25 kg hel 20 EBC - Castle maltingChâteau Crystal 25 kg knust 150 EBC - Castle malting
Mangrove Jack"s Beer Enhancer 2 Erstatter dekstrose i mørke ekstraktsett4" til 2" konisk overgang Tri-Clamp i rustfritt stålSilikonpakning for Mini Keg ID 32mm x OD 35mm x 3mm tykkelsePumpehode til magnetpumpe reservedel til 6w magnetpumpe